Home | Machinery Brochure
| Mulcher for grass cleaning, straws and remains
Mulcher for grass cleaning, straws and remains
The TH mulcher is equipped with a large diameter and thickness rotor with interchangeable hammers or blades. It rotates at high speed by cutting the grass at the same time it is mulched into the cavity of the machine, leaving the remains to the outside through the back and deposited uniformly on the ground without leaving cords. The degree of cut is so high that the size of the remains is almost negligible. Bottlenecks or congestions never appear in the rear roller, since the material passes ove
TECHNICAL FEATURES
• Rotor with hammers or blades (interchangeable) supported on self-aligning spherical roller bearings.
• Three point linkage.
• Rear roller for optimal adaptation to the ground.
• PTO shaft to 540 and 1000 rpm.
• Number of belts: TH = 6; TH2 = 12 (6 +6).
• Ø20 mm bolt for fastening of the cutting tools to the rotor (hammers and blades).
• Total width: TH = Working width + 24 cm. TH2 = Working width + 35 cm.
• Uniform spread of the cutted material (without heaps).
• Treatment against corrosion and finished with electrostatic painting (double layer).
OPTIONS
• Pneumatic wheels (pair).
• Dual linkage (reversible) in fixed models.
• Double freewheel gearbox.
The TH mulcher can operate at 540 and 1000 rpm.
Our goal: the maximum satisfaction of our customers.
Fine mulching and homogeneous distribution of the residues.
Adjustable rear roller for optimum adaptation to the ground without interfering with the stream of evacuated material.
Optional: reversible attach.
Rotor equipped with hammers. Excellent for woody plants and resistant materials.
Rotor with blades for fine mulching (optional).
Optimum mulching in other type of plants such as corn, cotton, ...
Swing hitch pins for better adaptation to the ground.
PT
